TEUplanner › Calculate container loading
How to calculate container loading
How many containers do I need, and which type? This guide shows how to calculate container loading step by step – or let the free TEUplanner do it for you, including a 3D stowage plan.
Open the free container load calculator →Step by step
- Collect package data: For every line: length, width, height, weight, quantity, packaging (carton, pallet, crate …) and whether it is stackable or may be tilted.
- Add up volume and weight: Volume per package = L × W × H (in metres) = CBM. Sum total volume and total weight over all lines.
- Pre-select the container: Compare total volume with container volume (20ft ≈ 33 m³, 40ft ≈ 68 m³, 40ft HC ≈ 76 m³) and assume a realistic fill rate of about 75–90 %.
- Check weight limits: Respect the container payload and the gross weight allowed for road haulage (e.g. typically 40 t in Germany, 44 t in combined transport, including truck and container).
- Check dimensions, pallets and stacking: Does every package fit through the door? How many pallets fit on the floor, can they be double-stacked? Oversized items need an open top or flat rack.
- Plan stowage and weight distribution: Heavy at the bottom and front, centre of gravity ideally between 40 and 60 % of the container length, fill gaps with dunnage or air bags.
Worked example
Cargo: 26 Euro pallets (120 × 80 × 150 cm, 600 kg each, not stackable).
Volume: 1.2 × 0.8 × 1.5 = 1.44 m³ per pallet → 37.4 m³ total. Weight: 15,600 kg.
Result: By volume a 40ft container would be enough – but its floor takes at most 25 Euro pallets, and at 1.50 m they cannot be stacked. So you need e.g. one 40ft plus one 20ft container. TEUplanner checks exactly these cases automatically.
Common mistakes
- Calculating with volume only and forgetting the pallet floor area.
- Ignoring weight – heavy cargo often hits the limit at half the volume.
- Overlooking door dimensions: the door opening is smaller than the interior.
- No allowance for load securing.